Removing The Fixing Upper Unit - Canon iR6570 series Service Manual

Chapter 8
[2]
[1]
3) Remove the 2 screws [1], and detach the fixing feed unit front cover
[2]; then, remove the 2 screws [3], and detach the fixing feed unit
middle cover [4].
[3]
[3] [4]

8.10.26.3 Removing the Fixing Upper Unit

1) Open the delivery unit [1]; then, remove the screw [2], and detach the
fixing upper cover [3].
[1]
2) Disconnect the 2 connectors [1]; then, remove the 3 screws [2], and
detach the fixing drive assembly [3].
8-76
F-8-237
[1]
[2]
[1]
F-8-238
0010-2738
[3]
[2]
F-8-239
[2]
3) Release the 3 locks of the harness guide [1], and free the harness from
the harness guide; then, disconnect the 6 connectors.
[2]
Be sure to disconnect the connector of the shutter HP sensor. If you try
to detach the fixing upper unit later without first disconnecting the
connector, you can deform the shutter sensor base plate or damage the
connector.
4) Remove the 2 screws [1], ad detach the fixing upper unit [2] in the
direction of the arrow.
[1] [2]
[2] [3]
F-8-240
[2]
[1]
[2]
[2] [1]
F-8-241