Canon iR6570 series Service Manual page 387

[1] [2]
5) Remove the E-ring [1], and remove the gear [2].
[2]
6) Remove the E-ring [1], and remove the gear [2].
Note:
Of the following steps, steps 7) and 8) are performed at the rear of the
machine:
7) Remove the 4 screws [1], and disconnect the connector [3] found
inside of the delivery motor [2].
[3]
[3] [4] [1]
F-9-75
[1]
F-9-76
[2] [1]
F-9-77
[1]
[1]
8) Remove the 3 screws [1], and shift the connector support plate [2]
toward the outside. (You need not detach it.)
[1]
[1]
9) Remove the 2 E-rings [1], and remove the 2 bearings [2]; then, detach
the inside delivery roller [3].
Chapter 9
[2] [1]
F-9-78
F-9-79
[2]
F-9-80
9-33