Making Pre-Checks; Selecting The Site - Canon iR6570 series Service Manual

2.1 Making Pre-Checks

2.1.1 Selecting the Site

The site must meet the following requirements; if possible, visit the user's premises before the machine is delivered.
1. The place must fall within the following ranges of temperature and humidity. The site must not be near a water faucet, water boiler, humidifier, or
refrigerator.
<Assured environmental zone>
[A]: A zone. All quality standard items are satisfied.
[B]: B zone. Some quality standard items are inferior to those in A zone or not satisfied.
[C]: C zone. Copying operation is performed normally without any safety issues, malfunction, and errors in display.
2. The site must not be near a source of fire or subject to dust or ammonium gas.
If exposed to direct rays of the sun, provide curtains.
3. The amount of ozone generated by the machine in operation is not of a level that would harm the health of individuals around it. However, some
individuals may find its odor unpleasant when it is used for a long time in the room with poor ventilation. Be sure to ventilate the room well to provide
a good working environment.
4. Be sure that the machine's feet will keep in contact with the floor and the machine will remain level.
5. Be sure that the machine will be at least 10 cm from all walls, offering enough space for its use.
-Without Options
(%RH)
100
[C]
90
85
[B]
75
70 [A]
50
25
20
15
10
5
0 10 15
7.5
20 25 30 35
23 27.5 32.5
F-2-1
40 (degC)
Chapter 2
0008-8566
2-1