Chapter 2
9) Cut off the area [1] of the right cover (upper) shown in the fig. below using nippers.
10) Attach back the right cover (upper) detached in step 1).
11) Connect the power cable to a receptacle.
12) Turn on the main power switch, and check the indication requesting for setting the control card.
13) Select the following service mode COPIER>FUNCTION>INSTALL>CARD, and enter the card number of use (1 to 2001).
- Of the cards used by user, enter the minimum card number.
- 1000 cards are available from the number entered.
14) Follow the instructions on the shutdown sequence screens to operate the touch panel, and turn off the main power switch.
15) Turn on the main power switch.
16) Insert the control card, and make sure that the machine becomes ready to copy.
2-28
[1]
[2]
F-2-87
[1]
F-2-88