Time Zone Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™
Field
Offset
Status
Click Refresh to display the latest information from the router.

Time Zone Configuration

Use the Time Zone Configuration page to manually configure the system clock settings. The SNTP client must
be disabled to allow manual configuration of the system time and date.
To access the page, click System > Advanced Configuration > Time Zone > Time Zone in the navigation menu.
Field
Time Zone – This section contains the following time zone settings:
Offset
Zone
Date and Time – Use the fields in this section to manually configure the system time and date. If the SNTP client is enabled (Unicast
mode or Broadcast mode), these fields cannot be configured.
Time
Date
Use the buttons to perform the following tasks:
• If you make any change to the page, click Submit to apply the settings.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Time Zone Summary Fields (Continued)
Description
The offset in hours from Coordinated Universal Time (UTC), also known as Greenwich Mean Time (GMT).
Indicates if summer time is currently active.
Time Zone Configuration
Time Zone Configuration Fields
Description
The system clock's offset from UTC, which is also known as Greenwich Mean Time (GMT).
The acronym that represents the time zone. This field is not validated against an official list of time zone
acronyms.
The current time in hours, minutes, and seconds on the system clock.
The current date in month, day, and year on the system clock. To change the date, click
field, select the year from the menu, browse to the desired month, and click the date.
Configuring System Information
next to the
123