Igmp Snooping Multicast Router Vlan Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

IGMP Snooping Multicast Router VLAN Configuration

Use this page to enable or disable specific VLANs as multicast router interfaces for a physical port or LAG.
A multicast router interface faces a multicast router or IGMP querier and receives multicast traffic.
To access the IGMP Snooping Multicast Router VLAN Configuration page, click Switching > IGMP Snooping >
Multicast Router VLAN Configuration in the navigation menu.
Field
Interface
VLAN IDs
Configured VLAN IDs
Use the buttons to perform the following tasks:
• If you make any changes to this page, click Submit to apply the changes.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
IGMP Snooping Multicast Router VLAN Configuration
IGMP Snooping Multicast Router VLAN Configuration Fields
Description
Select the port or LAG on which to enable or disable a VLAN multicast routing interface.
The VLANs configured on the system that are not currently enabled as multicast router interfaces on
the selected port or LAG. To enable a VLAN as a multicast router interface, click the VLAN ID to select
it (or press and hold CTRL to select multiple VLAN IDs). Then, click
the Configured VLAN IDs field.
The VLANs that are enabled as multicast router interfaces on the selected port or LAG. To disable a
VLAN as a multicast router interface, click the VLAN ID to select it (or press and hold CTRL to select
multiple VLAN IDs). Then, click
Configuring Switching Information
to move the selected VLAN(s) back to the VLAN IDs field.
to move the selected VLAN(s) to
150