Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 134

EdgeSwitch Administration Guide
™
Field
Interface
Operational State
CoS Override Mode
Voice VLAN Interface Mode
Add Voice VLAN and Edit Voice VLAN dialog boxes – When you click Add or Edit, the following configurable field is displayed:
Voice VLAN Interface Value
Use the buttons to perform the following tasks:
• To configure Voice VLAN settings on a port, click Add. Select the interface to configure from the Interface
drop-down menu, configure the remaining settings, and then click Submit to apply the changes.
• To change the Voice VLAN settings, select the interface to modify and click Edit, configure the settings as
needed, and then click Submit to apply the changes.
• To remove the Voice VLAN configuration from one or more ports, select each entry to delete, click
Remove, and confirm the deletion.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Voice VLAN Interface Summary
Voice VLAN Interface Summary Fields
Description
The interface associated with the rest of the data in the row. When adding a Voice VLAN configuration
to a port, the Interface menu allows you to select the port to configure. Only interfaces that have not
been configured with Voice VLAN settings can be selected from the menu.
The operational status of the Voice VLAN feature on the interface. To be enabled, Voice VLAN must be
globally enabled and enabled on the interface. Additionally, the interface must be up and have a link.
The Class of Service override mode:
• Enabled The port ignores the 802.1p priority value in the Ethernet frames it receives from
connected devices.
Disabled
• The port trusts the priority value in the received frame.
Indicates how an IP phone connected to the port should send voice traffic:
• VLAN ID Forward voice traffic in the specified voice VLAN.
• Dot1p Tag voice traffic with the specified 802.1p priority value.
• None Use the settings configured on the IP phone to send untagged voice traffic.
• Untagged Send untagged voice traffic.
Disable
• Operationally disables the Voice VLAN feature on the interface.
When adding or editing Voice VLAN settings for an interface and either VLAN ID or Dot1p is selected
as the Voice VLAN Interface Mode, specify the voice VLAN ID or the Dot1p priority value that the
connected IP phone should use for voice traffic.
Configuring Switching Information
133