Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 122
User interface for poe switches
Hide thumbs
Also See for EdgeSwitch ES-24-250W:
- Command reference manual (435 pages) ,
- Quick start manual (25 pages) ,
- Quick start manual (14 pages)
Table of Contents
Advertisement
EdgeSwitch
Administration Guide
™
Field
Type
Interface
VLAN ID
Tunnel ID
Use the buttons to perform the following tasks:
• If you make any changes to the page, click Submit to apply the settings.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
SNTP Source Interface Configuration
SNTP Source Interface Configuration Fields
Description
The type of interface to use as the source interface:
•
None
The primary IP address of the originating (outbound) interface is used as the source
address.
•
Interface
The primary IP address of a physical port is used as the source address.
VLAN
•
The primary IP address of a VLAN routing interface is used as the source address.
•
Tunnel
The primary IP address of a tunnel interface is used as the source address.
When the selected Type is Interface, select the physical port to use as the source interface.
When the selected Type is VLAN, select the VLAN to use as the source interface. The menu contains
only the VLAN IDs for VLAN routing interfaces.
When the selected Type is Tunnel, select the tunnel interface to use as the source interface.
Configuring System Information
121
Advertisement
Table of Contents
