Configuring Diffserv; Diffserv Global Configuration And Status - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

Configuring Diffserv

Use this page to configure the administrative mode of Differentiated Services (DiffServ) support on the
device and to view the current and maximum number of entries in each of the main DiffServ private MIB
tables. DiffServ allows traffic to be classified into streams and given certain QoS treatment in accordance
with defined per-hop behaviors.
Packets are classified and processed based on defined criteria. The classification criteria is defined by a class.
The processing is defined by a policy's attributes. Policy attributes may be defined on a per-class instance
basis, and it is these attributes that are applied when a match occurs. A policy can contain multiples classes.
When the policy is active, the actions taken depend on which class matches the packet.

Diffserv Global Configuration and Status

Use the Diffserv Global Configuration and Status page to configure the Global DiffServ settings on the device.
To display the page, click QoS > Diffserv > Global in the navigation menu.
Field
Diffserv Admin Mode
MIB Table – The information in this table displays the number of entries (rows) that are currently in each of the main DiffServ private
MIB tables and the maximum number of rows that can exist in each table.
Class Table
Class Rule Table
Policy Table
Policy Instance Table
Policy Attribute Table
Service Table
Use the buttons to perform the following tasks:
• If you change any fields on this page, click Submit to apply the changes.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Diffserv Global Configuration and Status
Diffserv Global Configuration and Status Fields
Description
The administrative mode of DiffServ on the device. While disabled, the DiffServ configuration is
retained and can be changed, but it is not active. While enabled, Differentiated Services are active.
The current and maximum number of classifier entries in the table. DiffServ classifiers differentiate
among traffic types.
The current and maximum number of class rule entries in the table. Class rules specify the match
criteria that belong to a class definition.
The current and maximum number of policy entries in the table. The policy determines the traffic
conditioning or service provisioning actions applied to a traffic class.
The current and maximum number of policy-class instance entries in the table. A policy-class instance
is a policy that is associated with an existing DiffServ class.
The current and maximum number of policy attribute entries in the table. A policy attribute entry
attaches various policy attributes to a policy-class instance.
The current and maximum number of service entries in the table. A service entry associates a DiffServ
policy with an interface and inbound or outbound direction.
Configuring Quality of Service
248