Port Summary - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

Port Summary

The Port Summary Statistics page shows statistical information about the packets received and transmitted
by each port and LAG.
To access the page, click System > Statistics > System > Port Summary in the navigation menu.
Field
Interface
Rx Good
Rx Errors
Rx Bcast
Tx Good
Tx Errors
Tx Collisions
Use the buttons to perform the following tasks:
• Click Clear Counters to clear all the statistics counters, resetting all summary and detailed statistics for
this switch to default values. The discarded packets count cannot be cleared.
• Click Clear All Counters to clear counters for all switches in the stack.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Port Summary Statistics
Port Summary Statistics Fields
Description
Identifies the port or LAG.
The total number of inbound packets received by the interface without errors.
The number of inbound packets that contained errors preventing them from being deliverable to a
higher-layer protocol.
The total number of good packets received that were directed to the broadcast address. Note that this
number does not include multicast packets.
The total number of outbound packets transmitted by the interface to its Ethernet segment
without errors.
The number of outbound packets that could not be transmitted because of errors.
The best estimate of the total number of collisions on this Ethernet segment.
Configuring System Information
82