Igmp Snooping Multicast Router Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

IGMP Snooping Multicast Router Configuration

If a multicast router is attached to the switch, its existence can be learned dynamically. You can also statically
configure a switch port as a multicast router interface. Use the IGMP Snooping Multicast Router Configuration
page to manually configure an interface as a static multicast router interface.
To access the IGMP Snooping Multicast Router Configuration page, click Switching > IGMP Snooping >
Multicast Router Configuration in the navigation menu.
Field
Interface
Multicast Router
Use the buttons to perform the following tasks:
• To or disable multicast router configuration on one or more interfaces, select the interfaces, click Edit,
configure the Multicast Router field, and click Submit to apply the changes.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
IGMP Snooping Multicast Router Configuration
IGMP Snooping Multicast Router Configuration Fields
Description
Select the physical or LAG interface to display.
Set the multicast router status:
• Enabled The port is a multicast router interface.
• Disabled The port does not have a multicast router configured.
Configuring Switching Information
148