Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 172

EdgeSwitch Administration Guide
™
Use the 802.1p Priority Mapping page in the Class of Service submenu to assign 802.1p priority values to
various traffic classes on one or more interfaces.
To display the page, click Switching > Class of Service > 802.1p Priority Mapping in the navigation menu.
Field
Interface
Priority 0 - Priority 7
Edit 802.1p Priority Mapping dialog box – Click Edit to open this dialog box and configure these additional fields:
802.1p Priority
Traffic Class
Use the buttons to perform the following tasks:
• To edit an interface's settings, select the entry, click Edit, configure the settings as needed, and click
Submit to apply the new settings to the switch.
• Click Refresh to update the screen with most recent data.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
802.1p Priority Mapping
802.1p Priority Mapping Fields
Description
The interface associated with the rest of the data in the row. The Global entry represents the common
settings for all interfaces, unless specifically overridden individually.
The heading row lists each 802.1p priority value (Priority 0 to Priority 7), and the data in the table shows
which traffic class is mapped to the priority value. Incoming frames containing the designated 802.1p
priority value are mapped to the corresponding traffic class in the device.
The 802.1p priority value to be mapped.
The internal traffic class to which the corresponding 802.1p priority value is mapped. The default value
for each 802.1p priority level is displayed for reference.
Configuring Switching Information
171