Vlan Internal Usage - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™
Use the buttons to perform the following tasks:
configure a specific port interface, select the interface's entry from table, click Edit, configure the
• To
fields as needed, and click Submit
• To configure all port interfaces, click Edit All
the changes.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.

VLAN Internal Usage

Use the VLAN Internal Usage Configuration page to assign a Base VLAN ID for internal allocation of VLANs to
the routing interface.
To access the VLAN Internal Usage Configuration page, click Switching > VLAN > Internal Usage in the
navigation menu.
Field
Base VLAN ID
Allocation Policy
VLAN ID
Routing Interface
Use the buttons to perform the following tasks:
• If you change any information on the page, click Submit to apply the changes to the system.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
to apply the changes.
, configure the fields as needed, and click Submit
VLAN Internal Usage
VLAN Internal Usage Fields
Description
The first VLAN ID to be assigned to a port-based routing interface.
Determines whether VLAN IDs assigned to port-based routing interfaces start at the base and
decrease in value (Descending) or start at the base and increase in value (Ascending).
The VLAN ID assigned to a port-based routing interface. The device automatically assigns an unused
VLAN ID when the routing interface is created.
The port-based routing interface associated with the VLAN.
Configuring Switching Information
to apply
130