Snmp User Security Model - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™
Field
Read
Write
Notify
Use the buttons to perform the following tasks:
• To add an SNMP group, click Add. In the Add new Access Control Group dialog box, enter the settings, and
then click Submit to apply the changes.
• To remove one or more SNMP groups, select each entry to delete, click Remove, and confirm the deletion.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.

SNMP User Security Model

The SNMP User Security Model page provides the capability to configure the SNMP V3 user accounts.
To access the page, click System > Advanced Configuration > SNMP > User Security Model in the
navigation menu.
Field
Engine ID Type
Engine ID
User Name
Ubiquiti Networks, Inc.
SNMP Access Control Group Fields (Continued)
Description
The level of read access rights for the group. The menu includes the available SNMP views. When
adding a group, select the check box to allow the field to be configured, then select the desired view
that restricts management access to viewing the contents of the agent.
The level of write access rights for the group. The menu includes the available SNMP views. When
adding a group, select the check box to allow the field to be configured, then select the desired view
that permits management read-write access to the contents of the agent but not to the community.
The level of notify access rights for the group. The menu includes the available SNMP views. When
adding a group, select the check box to allow the field to be configured, then select the desired view
that permits sending SNMP traps or informs.
SNMP User Security Model
SNMP User Security Model Fields
Description
(Add New SNMP User dialog box only)
• Local The engine ID is the switch's own engine ID (the engine ID cannot be changed).
• Remote The engine ID is for a remote device and needs to be entered.
Each SNMPv3 agent has an engine ID that uniquely identifies the agent in the device. If given this
entry will be used only for packets whose engine ID is this. This field takes a hexadecimal string in the
form 0102030405.
Specifies the name of the SNMP user being added for the User-based Security Model (USM). Each user
name must be unique within the SNMP agent user list. A user name cannot contain any leading or
embedded blanks.
Configuring System Information
77