Email Alert Server Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™
Use the buttons to perform the following tasks:
• If you make changes to the page, click Submit to apply the changes to the running configuration.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
After configuring all email alert settings, click Test to send a test message to the configured address(es).

Email Alert Server Configuration

Use the Email Alert Server Configuration page to add, edit, and remove information about the network SMTP
(mail) server that handles email alerts sent from the switch.
To access the Email Alert Server Configuration page, click System > Advanced Configuration > Email Alerts
> Server in the navigation menu.
Field
Address
Port
Security
User Name
Password
Use the buttons to perform the following tasks:
• To add an SMTP server, click Add, configure the desired settings, and click Submit to apply the changes.
• To edit the information for an existing SMTP server (except the Host Name or IP Address field), select the
check box next to the entry and click Edit. When finished editing, click Submit to apply the changes.
• To delete a configured SMTP server from the list, select the check box next to the entry to delete and click
Remove.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Email Alert Server Configuration
Email Alert Server Configuration Fields
Description
The IPv4/IPv6 address or host name of the SMTP server that handles email alerts that the device sends.
The TCP port that email alerts are sent to on the SMTP server.
The type of authentication to use with the mail server, which can be TLSv1 (SMTP over SSL) or None (no
authentication is required).
If the Security is TLSv1, this field specifies the user name required to access the mail server.
If the Security is TLSv1, this field specifies the password associated with the configured user name for
mail server access. When adding or editing the server, you must retype the password to confirm that it
is entered correctly.
Configuring System Information
61