Cli Banner Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

CLI Banner Configuration

Use the CLI Banner Configuration page to configure a message that appears before the user prompt as a
Pre-login banner. The message configured shows up on Telnet, SSH, and Console connections.
To access the CLI Banner Configuration page, click System > Management Access > CLI Banner in the
navigation menu.
Field
CLI Banner Message
Use the buttons to perform the following tasks:
• If you make changes to the page, click Submit to apply the changes to the running configuration.
• Click Clear to clear the CLI banner message from the device. After you click Clear, you must confirm the
action. You can also clear the CLI banner by deleting the text in the CLI Banner Message field and clicking
Submit.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
CLI Banner Configuration
CLI Banner Configuration Fields
Description
Text area for creating, viewing, or updating the CLI banner message. To create the CLI banner message,
type the desired message in the text area. If you reach the end of the line, the text wraps to the next
line. The line might not wrap at the same location in the CLI. To create a line break (carriage return) in
the message, press Enter on the keyboard. The line break in the text area will be at the same location
in the banner message when viewed through the CLI.
Configuring System Information
51