EdgeSwitch CLI Command Reference
Time Zone Commands
Use the Time Zone commands to configure system time and date, Time Zone and Summer Time (that is, Daylight
Saving Time) . Summer time can be recurring or non-recurring .
clock set
This command sets the system time and date .
clock set hh:mm:ss
Format
clock set mm/dd/yyyy
Mode
Global Config
Parameter
hh:mm:ss
mm/dd/yyyy
Example: The following shows examples of the command .
(UBNT EdgeSwitch) (Config)# clock set 03:17:00
(UBNT EdgeSwitch) (Config)# clock set 11/01/2011
clock summer-time date
Use the clock summer-time date command to set the summer-time offset to Coordinated Universal Time (UTC) . If
the optional parameters are not specified, they are read as either 0 or \0, as appropriate .
clock summer-time date {date month year hh:mm date month year hh:mm}
Format
[offset offset] [zone acronym]
Mode
Global Config
Parameter
date
month
year
hh:mm
offset
acronym
Example: The following shows examples of the command .
(UBNT EdgeSwitch) (Config)# clock summer-time date 1 nov 2011 3:18 2 nov 2011 3:18
(UBNT EdgeSwitch) (Config)# clock summer-time date 1 nov 2011 3:18 2 nov 2011 3:18 offset 120
zone INDA
Ubiquiti Networks, Inc.
Description
Enter the current system time in 24-hour format in hours (0-23), minutes (0-59), and seconds (0-59).
Enter the current system date the format month, day, year:
• The range for month is 1 to 12.
• The range for the day of the month is 1 to 31.
• The range for year is 2010 to 2079.
Description
Day of the month. Range is 1 to 31.
Month. Range is the first three letters by name; for example, "jan" for January.
Year. The range is 2010 to 2079.
Time in 24-hour format in hours and minutes:
• The range for hours is 0 to 23.
• The range for minutes is 0 to 59.
The number of minutes to add during the summertime. The range is 1 to 1440.
The acronym for the summer-time to be displayed when summertime is in effect. The range is up to
four characters are allowed.
Utility Commands
148