Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 126

EdgeSwitch Administration Guide
™
Field
Summer Time
Date Range – The fields in this section are available only if the Summer Time field is set to Non-Recurring mode.
Start Date
Starting Time and Day
End Date
Ending Time of Day
Recurring Date – The fields in this section are available only if the Summer Time field is set to Recurring mode.
Start Week
Start Day
Start Month
Starting Time of Day
End Week
End Day
End Month
Ending Time of Day
Zone – The fields in this section are available for all modes selected from the Summer Time field except Disable.
Offset
Zone
Use the buttons to perform the following tasks:
• If you make any changes to the page, click Submit to apply the settings.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Summer Time Configuration Fields
Description
The summer time mode on the system:
• Disable Summer time is not active, and the time does not shift based on the time of year.
• Recurring Summer time occurs at the same time every year. The start and end times and dates for
the time shift must be manually configured.
• EU The system clock uses the standard recurring summer time settings used in countries in the
European Union. When this field is selected, the rest of the applicable fields on the page except
Offset and Zone are automatically populated and cannot be edited.
USA
• The system clock uses the standard recurring daylight saving time settings used in the
United States. When this field is selected, the rest of the applicable fields on the page except Offset
and Zone are automatically populated and cannot be edited.
• Non-Recurring Summer time settings are in effect only between the start date and end date
of the specified year. When this mode is selected, the summer time settings do not repeat on an
annual basis.
The day, month, and year that summer time begins. To change the date, click
select the year from the menu, browse to the desired month, and click the date.
The time, in hours and minutes, to start summer time on the specified day.
The day, month, and year that summer time ends. To change the date, click
the year from the menu, browse to the desired month, and click the date.
The time, in hours and minutes to end summer time on the specified day.
The week of the month within which summer time begins.
The day of the week on which summer time begins.
The month of the year within which summer time begins.
The time, in hours and minutes, to start summer time.
The week of the month within which summer time ends.
The day of the week on which summer time ends.
The month of the year within which summer time ends.
The time, in hours and minutes, to end summer time.
The number of minutes to shift the summer time from the standard time.
The acronym associated with the time zone when summer time is in effect.
Configuring System Information
next to the field,
next to the field, select
125