Dhcp Client Options - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

DHCP Client Options

Use the DHCP Client Options page to configure DHCP client settings on the system. To access the DHCP Client
Options page, click System > Connectivity > DHCP Client Options in the navigation menu.
Field
DHCP Vendor Class ID Mode
DHCP Vendor Class ID String
Use the buttons to perform the following tasks:
• Click Submit to apply the settings immediately to the running configuration.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
HTTP Configuration
Use the HTTP Configuration page to configure the HTTP server settings on the system. To access the HTTP
Configuration page, click System > Management Access > HTTP in the navigation menu.
Field
HTTP Admin Mode
HTTP Session Soft Timeout
Ubiquiti Networks, Inc.
DHCP Client Options
DHCP Client Options Fields
Description
The VCI administrative mode (Enable or Disable). When enabled, the DHCP client includes the text
configured as the DHCP Vendor Class ID String in DHCP requests.
The text string added to DHCP requests as Option-60; i.e., Vendor Class Identifier option.
HTTP Configuration
HTTP Configuration Fields
Description
Used to Enable (default) or Disable the HTTP administrative mode. If this field is set to Disable, access to
the UI is limited to secure HTTP, which is disabled by default.
Specifies the inactivity timeout value for HTTP sessions, in the range of 1 to 60 minutes (0 corresponds
to an infinite timeout). The default value is 5 minutes.
Configuring System Information
31