Oui Based Auto Voip - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

OUI Based Auto VoIP

Use this page to configure the Organizationally Unique Identifier (OUI) based Auto VoIP priority and to
enable or disable the Auto VoIP mode on the interfaces.
To display the OUI Based Auto VoIP page, click QoS > Auto VoIP > OUI Based Auto VoIP in the navigation menu.
Field
Auto VoIP VLAN
Priority
Interface
Auto VoIP Mode
Operational Status
Use the buttons to perform the following tasks:
• If you change the Priority field, click Submit to apply the change.
• To configure settings on one or more interfaces, select each interface and click Edit. In the Edit OUI Based
Port Configuration window, edit the settings as needed, and click Submit to apply the changes.
Ubiquiti Networks, Inc.
OUI Based Auto VoIP
OUI Based Auto VoIP Fields
Description
The VLAN used to segregate VoIP traffic from other non-voice traffic. All VoIP traffic that matches a
value in the known OUI list gets assigned to this VoIP VLAN.
The 802.1p priority used for traffic that matches a value in the known OUI list. If the Auto VoIP mode
is enabled and the interface detects an OUI match, the device assigns the traffic in that session to the
traffic class mapped to this priority value. Traffic classes with a higher value are generally used for
time-sensitive traffic.
The interface associated with the rest of the data in the row. When editing Auto VoIP settings on one
or more interfaces, this field identifies the interface(s) being configured.
The administrative mode of OUI-based Auto VoIP on the interface.
The interface's operational status (Up or Down). To be Up, an interface must be administratively
enabled and have a link.
Configuring Quality of Service
240