Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 82

EdgeSwitch Administration Guide
™
Field
Status section:
Current Usage
Peak Usage
Maximum Allowed
Static Entries
Dynamic Entries
Total Entries Deleted
System section:
Interface
Time Since Counters Last
Cleared
Use the command buttons to perform the following actions:
• Click Refresh to refresh the data on the screen with the present state of the data in the switch.
• Click Clear Counters to clear all the statistics counters, resetting all switch summary and detailed statistics
to default values. The discarded packets count cannot be cleared.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Switch Statistics Fields (Continued)
Description
In the FDB Entries column, the value shows the number of learned and static entries in the MAC
address table. In the VLANs column, the value shows the total number of static and dynamic VLANs
that currently exist in the VLAN database.
The highest number of entries that have existed in the MAC address table or VLAN database since the
most recent reboot.
The maximum number of statically configured or dynamically learned entries allowed in the MAC
address table or VLAN database.
The current number of entries in the MAC address table or VLAN database that an administrator has
statically configured.
The current number of entries in the MAC address table or VLAN database that have been dynamically
learned by the device.
The number of VLANs that have been created and then deleted since the last reboot. This field does
not apply to the MAC address table entries.
The interface index object value of the interface table entry associated with the Processor of this
switch. This value is used to identify the interface when managing the device by using SNMP.
The amount of time in days, hours, minutes, and seconds, that has passed since the statistics for this
device were last reset.
Configuring System Information
81