Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 203
User interface for poe switches
Hide thumbs
Also See for EdgeSwitch ES-24-250W:
- Command reference manual (435 pages) ,
- Quick start manual (25 pages) ,
- Quick start manual (14 pages)
Table of Contents
Advertisement
EdgeSwitch
Administration Guide
™
2. Next to Route Type, select one of the following:
•
Default
The route the device uses to send a packet if the routing table does not contain a longer
matching prefix for the packet's destination. The routing table can contain only one default route.
•
Static
A route that is manually added to the routing table by an administrator.
Static Reject
•
A route where packets that match the route are discarded instead of forwarded. The
device might send an ICMP Destination Unreachable message.
3. Configure the remaining available fields in the Add Route dialog box.
Note:
The selected Route Type determines the fields that are available to be configured. Some of
the fields listed in the table "Configured Routes Fields" on page 201 are not available when
configuring certain types of routes.
4. Click Submit to apply the changes.
The new route is added, and you are returned to the Configured Routes page.
Ubiquiti Networks, Inc.
Configuring Routing
202
Advertisement
Table of Contents
