Accessing The Configuration Interface - Ubiquiti EdgeSwitch 16 XG Quick Start Manual

Accessing the Configuration Interface

The EdgeSwitch XG is set to DHCP by default, so it will try to
automatically obtain an IP address. If that fails, then it will use
the default fallback IP address, 192.168.1.2. Proceed to the
appropriate section, DHCP or Fallback IP Address:
DHCP
Use one of the following methods:
• Set up the DHCP server to provide a specific IP address to the
EdgeSwitch XG based on its MAC address (on the label).
• Let the EdgeSwitch XG obtain an IP address and then check
the DHCP server to see which IP address was assigned.
To log in, follow these steps:
1. Launch your web browser. Type the appropriate IP address
in the address field. Press enter (PC) or return (Mac).
2. The login screen will appear. Enter ubnt in the Username
and Password fields. Read the Ubiquiti License Agreement,
and check the box next to I agree to the terms of this License
Agreement to accept it. Click Login.
The EdgeSwitch Configuration Interface will appear. Customize
additional settings as needed. For more information, refer
to the EdgeSwitch documentation, which is available at
documentation.ubnt.com/edgemax