Lldp Interface Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

LLDP Interface Configuration

Use the LLDP Interface Summary page to specify LLDP parameters that are applied to a specific interface.
To display the LLDP Interface Summary page, click Switching > LLDP > Interface in the navigation menu.
Note: When adding or editing LLDP settings on an interface, select the appropriate check box to
enable a feature, or clear the check box to disable a feature.
Field
Interface
Link Status
Transmit
Receive
Notify
Optional TLV(s)
Transmit Management
Information
Add/Edit LLDP Interface dialog box – Click Add or Edit to open a dialog box and configure the LLDP settings for an interface:
Port Description
System Name
System Description
System Capabilities
Ubiquiti Networks, Inc.
LLDP Interface Summary
LLDP Interface Summary Fields
Description
The interface associated with the rest of the data in the row. Only interfaces that have at least one
LLDP setting enabled appear in the table. In the Add LLDP Interface window, use this field to select the
interface with the LLDP settings to configure. In the Edit LLDP Interface window, this field identifies the
interface that is being configured.
The link status of the interface: Up or Down. An interface that is down does not forward traffic.
The LLDP advertise (transmit) mode on the interface. If the transmit mode is enabled, the interface
sends LLDP Data Units (LLDPDUs) that advertise the mandatory TLVs and any optional TLVs that are
enabled.
The LLDP receive mode on the interface. If the receive mode is enabled, the device can receive
LLDPDUs from other devices.
The LLDP remote data change notification status on the interface. If the notify mode is enabled, the
interface sends SNMP notifications when a link partner device is added or removed.
Select each check box next to the type-length value (TLV) information to transmit. Choices include:
• System Name To include system name TLV in LLDP frames. To configure the System Name, see
"System Description" on page 26.
• System Description To include system description TLV in LLDP frames.
• System Capabilities To include system capability TLV in LLDP frames.
• Port Description To include port description TLV in LLDP frames. To configure the Port
Description, see "Port Description" on page 67.
Select the check box to enable the transmission of management address instance. Clear the check box
to disable management information transmission. The default is Disabled.
Select this option to include the user-configured port description in the LLDPDU the interface
transmits.
Select this option to include the user-configured system name in the LLDPDU the interface transmits.
The system name, configured on the System Description page, is the SNMP server name for the device.
Select this option to include a description of the device in the LLDPDU the interface transmits. The
description includes information about the product model and platform.
Select this to advertise the primary function(s) of the device in the LLDPDU the interface transmits.
Configuring Switching Information
177