Diffserv Policy Summary - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

Diffserv Policy Summary

Use this page to create or remove DiffServ policies and to view summary information about the policies
that exist on the device. A policy defines the QoS attributes for one or more traffic classes. A policy attribute
identifies the action taken when a packet matches a class rule. A policy is applied to a packet when a class
match within that policy is found.
To display the Diffserv Policy Summary page, click QoS > Diffserv > Policy Summary in the navigation menu.
Field
Name
Type
Member Classes
Use the buttons to perform the following tasks:
• To add a DiffServ policy, click Add, configure the fields, and click Submit to apply the changes.
• To change the name of an existing policy, select the entry to modify and click Rename, enter the new
name, and click Submit to apply the change.
• To remove one or more configured policies, select each entry to delete and click Remove. You must
confirm the action before the entry is deleted.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Diffserv Policy Summary
Diffserv Policy Summary Fields
Description
The name of the DiffServ policy. When adding a new policy or renaming an existing policy, the name
of the policy is specified in the Policy field of the Add Policy dialog box.
The traffic flow direction to which the policy is applied:
• In The policy is specific to inbound traffic.
• Out The policy is specific to outbound traffic direction.
The DiffServ class or classes that have been added to the policy.
Configuring Quality of Service
253