Sntp Server Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™
Field
Unicast Sever Max Entries
Unicast Server Current Entries
Broadcast Count
Click Refresh to display the latest information from the router.

SNTP Server Configuration

Use the SNTP Server Configuration page to view and modify information for adding and modifying Simple
Network Time Protocol SNTP servers. To display the SNTP Server Configuration page, click System >
Advanced Configuration > SNTP > Server Configuration in the navigation menu.
Field
SNTP Server
Type
Port
Priority
Version
Add SNTP Server Dialog Box – When you click Add, this dialog box appears, containing the following additional field:
Host Name or IP Address
Use the buttons to perform the following tasks:
• To add an SNTP server, click Add, configure the fields as needed, and click Submit to apply the changes.
The SNTP server is added and appears in the SNTP Server list.
• To modify settings for an existing SNTP server, select the entry to update, click Edit, update the fields as
needed, and click Submit to apply the changes. You cannot edit the host name of address of a server.
• To remove an SNTP server from the list, select each entry to delete, click Remove, and confirm the deletion.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
SNTP Global Status Fields (Continued)
Description
The maximum number of unicast server entries that can be configured on this client.
The number of current valid unicast server entries configured for this client.
The number of unsolicited broadcast SNTP messages that have been received and processed by the
SNTP client since last reboot.
SNTP Server Configuration
SNTP Server Configuration Fields
Description
Select the IP address of a user-defined SNTP server to view or modify information about an SNTP
server, or click Add to configure a new SNTP server. You can define up to three SNTP servers.
Select IPv4 if you entered an IPv4 address, DNS if you entered a hostname.
Enter a port number from 1 to 65535. The default is 123.
Enter a priority from 1 to 3, with 1 being the highest priority. The switch will attempt to use the highest
priority server and, if it is not available, will use the next highest server.
Enter the protocol version number.
Specify the IPv4 address, IPv6 address, or DNS-resolvable host name of the SNTP server. Unicast SNTP
requests will be sent to this address. The address you enter is displayed in the SNTP Server field on the
main page. The address type is automatically detected.
Configuring System Information
119