Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 170

EdgeSwitch Administration Guide
™
Field
Description
Edit MST Port Entry dialog box – When you click Edit, this dialog box opens and allows you to configure these additional fields:
Auto-calculate Port Path
Cost
Port ID
Port Up Time Since
Counters Last Cleared
Port Mode
Designated Root
Designated Cost
Designated Bridge
Designated Port
Loop Inconsistent State
Transitions Into
LoopInconsistent State
Transitions Out Of
LoopInconsistent State
Use the buttons to perform the following tasks:
• To edit the MST port settings, click Edit, configure the settings as needed, and click Submit to apply the
new settings to the switch.
• Click Details to display the MST port settings.
• Click Refresh to update the screen with most recent data.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Spanning Tree MST Port Summary Fields (Continued)
Description
A user-configured description of the port.
If you select an interface and click Edit, the Edit MST Port Entry dialog box (described below) opens and
allows you to edit the MST port settings and view additional MST information for the interface.
Shows whether the path cost from the port to the root bridge is automatically determined by the
speed of the interface (Enabled) or configured manually (Disabled).
A unique value that is automatically generated based on the port priority value and the interface
index.
The amount of time that the port has been up since the counters were cleared.
The spanning tree administrative mode (Disable or Enable) on the port.
The bridge ID of the root bridge for the MST instance.
The path cost offered to the LAN by the designated port.
The bridge ID of the bridge with the designated port.
The port ID of the designated port.
Display True if the interface is currently in a loop inconsistent state; otherwise, displays False.
An interface transitions to a loop inconsistent state if loop guard is enabled and the port stops
receiving BPDUs. In this state, the interface does not transmit frames.
The number of times this interface has transitioned into loop inconsistent state.
The number of times this interface has transitioned out of loop inconsistent state.
Configuring Switching Information
169