Event Log - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

Event Log

Use the Event Log page to display the event log, which is used to hold error messages for catastrophic events.
After the event is logged and the updated log is saved in flash memory, the switch will be reset. The log
can hold at least 2,000 entries (the actual number depends on the platform and OS), and is erased when an
attempt is made to add an entry after it is full. The event log is preserved across system resets.
To access the Event Log page, click System > Logs > Event Log in the navigation menu.
Field
Log Index
Type
Filename
Line
Task ID
Code
Event Time
Click Refresh to update the screen and associated messages.
Ubiquiti Networks, Inc.
Event Log
Event Log Fields
Description
A display row index number used to identify the event log entry, with the most recent entry listed first
(lowest number).
The incident category that indicates the cause of the log entry: EVENT, ERROR, etc.
The EdgeSwitch source code filename identifying the code that detected the event.
The line number within the source file of the code that detected the event.
A system identifier of the task that was running when the event occurred. This value is assigned by,
and is specific to, the operating system.
An event-specific code value that is passed to the log handler by the source code file reporting the event.
A time stamp (days, hours, minutes, and seconds) indicating when the event occurred, measured from
the time the device was last reset. The only correlation between any two entries in the event log is the
relative amount of time after a system reset that the event occurred.
Configuring System Information
56