Dhcp Server Bindings Information - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™
Use the buttons to perform the following tasks:
• To add a vendor option, click Add Vendor Option, configure the available fields, and click Submit to
apply the changes.
• To edit a vendor option, select the entry to change and click Edit. Change the settings as needed (Pool
Name and Option Code are not configurable) and click Submit to apply the changes.
• To remove a vendor option, select each entry to delete and click Remove. You must confirm the action
before the entry is deleted.
• Click Refresh to refresh the data on the screen with the present state of the data in the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.

DHCP Server Bindings Information

Use the DHCP Server Bindings page to view information about the IP address bindings in the DHCP server
database.
To access the DHCP Server Bindings page, click System > Advanced Configuration > DHCP Server >
Bindings in the navigation menu.
Field
IP Address
Hardware Address
Lease Time Left
Pool Allocation Type
If you change any settings, click Submit to apply the changes to the system.
• To remove an entry from the table, select each entry to delete and click Clear Entries. You must confirm
the action before the binding is deleted.
• Click Refresh to refresh the data on the screen with the present state of the data in the switch.
Ubiquiti Networks, Inc.
DHCP Server Bindings
DHCP Server Bindings Fields
Description
The IP Address of the DHCP client.
The MAC address of the DHCP client.
The amount of time left until the lease expires in days, hours, and minutes.
The type of binding used:
• Dynamic The address was allocated dynamically from a pool that includes a range of IP
addresses.
Manual
• A static IP address was assigned based on the MAC address of the client.
• Inactive The pool is not in use.
Configuring System Information
107