Dhcp Snooping Statistics - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

User interface for poe switches
Hide thumbs Also See for EdgeSwitch ES-24-250W:
Table of Contents

Advertisement

EdgeSwitch
Administration Guide

DHCP Snooping Statistics

Use this page to configure the persistent location of the DHCP snooping bindings database. The bindings
database can be stored locally on the device or on a remote system somewhere else in the network. The
device must be able to reach the IP address of the remote system to send bindings to a remote database.
To access the DHCP Snooping Statistics page, click Switching > DHCP Snooping > Base > Statistics in the
navigation menu.
Field
Interface
MAC Verify Failures
Client Ifc Mismatch
DHCP Server Msgs Received
Use the buttons to perform the following tasks:
• To reset the statistics to zero for one or more interfaces, select each interface with the data to reset and
click Clear Counters. You must confirm the action before the counters are reset.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
DHCP Snooping Statistics
DHCP Snooping Statistics Fields
Description
The interface associated with the rest of the data in the row.
The number of DHCP messages that were dropped because the source MAC address and client
hardware address did not match. MAC address verification is performed only if it is globally enabled.
The number of packets that were dropped by DHCP snooping because the interface and VLAN on
which the packet was received does not match the client's interface and VLAN information stored in
the binding database.
The number of DHCP server messages (DHCPOFFER, DHCPACK, DHCPNAK, DHCPRELEASEQUERY) that
have been dropped on an untrusted port.
Configuring Switching Information
143

Advertisement

Table of Contents
loading

Table of Contents