Dhcp Snooping Persistent Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

DHCP Snooping Persistent Configuration

Use this page to configure the persistent location of the DHCP snooping bindings database. The bindings
database can be stored locally on the device or on a remote system somewhere else in the network. The
device must be able to reach the IP address of the remote system to send bindings to a remote database.
To access the DHCP Snooping Persistent Configuration page, click Switching > DHCP Snooping > Base >
Persistent in the navigation menu.
Field
Store
Remote IP Address
Remote File Name
Write Delay (Seconds)
Use the buttons to perform the following tasks:
• If you make any changes to this page, click Submit to apply the changes.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
DHCP Snooping Persistent Configuration
DHCP Snooping Persistent Configuration Fields
Description
The location of the DHCP snooping bindings database, which is either locally on the device (Local) or
on a remote system (Remote).
The IP address of the system on which the DHCP snooping bindings database will be stored. This field
is available only if Remote is selected in the Store field.
The file name of the DHCP snooping bindings database in which the bindings are stored. This field is
available only if Remote is selected in the Store field.
The amount of time to wait between writing bindings information to persistent storage. This allows
the device to collect as many entries as possible (new and removed) before writing them to the
persistent file.
Configuring Switching Information
142