EdgeSwitch
Administration Guide
™
TACACS+ Server Configuration
Use this page to view and configure information about the TACACS+ server(s) that have been configured
using the TACACS+ Server Summary page (see "TACACS+ Server Summary" on page 226).
To access the TACACS+ Server Configuration page, click Security > TACACS+ > Server Configuration in the
navigation menu.
Field
Server
Priority
Port
Key String
Connection Timeout
Use the buttons to perform the following tasks:
• If you change any fields on this page, click Submit to apply the changes.
• To remove a configured TACACS+ server, select it from the table, click Remove, and confirm the deletion.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
TACACS+ Server Configuration
TACACS+ Server Configuration Fields
Description
Specifies the TACACS+ Server IP address or Hostname.
Specifies the order in which the TACACS+ servers are used.
Specifies the authentication port.
Specifies the authentication and encryption key for TACACS+ communications between the device
and the TACACS+ server. The key must match the encryption used on the TACACS+ server.
The amount of time that passes before the connection between the device and the TACACS+ server
timeout.
Managing Device Security
227