Buffered Log - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

Buffered Log

The log messages the device generates in response to events, faults, errors, and configuration changes are
stored locally on the device in the RAM (cache). This collection of log files is called the RAM log or buffered
log. When the buffered log file reaches the configured maximum size, the oldest message is deleted from the
RAM when a new message is added. If the system restarts, all messages are cleared.
To access the Buffered Log page, click System > Logs > Buffered Log in the navigation menu.
Field
Log Index
Log Time
Severity
Component
Description
Use the buttons to perform the following tasks:
• Click Clear Log to clear the buffered log messages and reset the counters. The buffered log will be
repopulated with new entries as they occur on the system.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Buffered Log
Buffered Log Fields
Description
The position of the entry within the buffered log file. The most recent log message has a Log Index
value of 1.
The time the entry was added to the log.
The severity level associated with the log entry. The severity can be one of the following:
• Emergency (0) The device is unusable.
• Alert (1) Action must be taken immediately.
Critical (2)
• The device is experiencing primary system failures.
• Error (3) The device is experiencing non-urgent failures.
• Warning (4) The device is experiencing conditions that could lead to system errors if no action is
taken.
• Notice (5) The device is experiencing normal but significant conditions.
• Info (6) The device is providing non-critical information.
• Debug (7) The device is providing debug-level information.
The component that issued the log entry.
The text description for the log entry.
Configuring System Information
55