Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 261

EdgeSwitch Administration Guide
™
3. Type 2-3 in the VLAN ID or Range field, and then click Submit.
4. From the Port Configuration page, select VLAN 2 from the VLAN ID List.
5. From the Participation column in the interface table, select Include for ports 0/1 and 0/2 to specify that
these ports are members of VLAN 2.
6. Select the interface check box and click Edit. Select the Tagging All check box to specify that frames will
always be transmitted tagged from ports that are members of VLAN 2.
7. Click Submit.
8. Select VLAN 3 from the VLAN ID and Name List.
9. Select the Participate option in the VLAN field.
10. For ports 0/2, 0/3, and 0/4, select Include from the Participation menu to specify that these ports are
members of VLAN 3.
11. Click Submit.
12. Go to the Switching > VLAN > Port Summary page.
13. In the Interface column, select 0/1 and click Edit.
14. In the Acceptable Frame Type field, select Only Tagged to specify that untagged frames will be rejected on
receipt.
15. Click Submit.
16. In the Interface column, select 0/2 and click Edit.
17. In the Port VLAN ID field, enter 3 to assign VLAN 3 as the default VLAN for the port.
18. In the Acceptable Frame Types field, select Admit All to specify the untagged frames will be rejected on receipt.
19. Click Submit.
Ubiquiti Networks, Inc.
Add VLAN Dialog Box
VLAN Port Configuration Page
Configuration Examples
260