Routing Ip Interface Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

Routing IP Interface Configuration

Use the Routing IP Interface Configuration page to configure the IP routing settings for each interface.
To display the page, click Routing > IP > Interface Configuration in the navigation menu.
Field
Interface
Status
Routing Mode
Ubiquiti Networks, Inc.
Routing IP Interface Configuration
Routing IP Interface Configuration Fields
Description
The menu contains all interfaces that can be configured for routing. To configure routing settings for
an interface, select it from the menu and then configure the rest of the settings on the page.
Indicates whether the interface is currently capable of routing IP packets (Up) or cannot route packets
(Down). For the status to be Up, the routing mode and administrative mode for the interface must be
enabled. Additionally, the interface must have an IP address and be physically up (active link).
Used to Enable or Disable the administrative mode of IP routing on the interface.
Configuring Routing
195