EdgeSwitch
Administration Guide
™
Field
Terminal – The access methods in this section are CLI-based.
Telnet
SSH
Hypertext Transfer Protocol – The access methods in this section are through a web browser.
HTTP
HTTPS
Use the buttons to perform the following tasks:
• If you make changes to the page, click Submit to apply the changes to the running configuration.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Authentication List Configuration
Use the Authentication List Configuration page to view and configure the authentication lists used for
management access and port-based (IEEE 802.1X) access to the system. An authentication list specifies
which authentication method(s) to use to validate the credentials of a user who attempts to access the
device. Several authentication lists are preconfigured on the system. These are default lists, and they cannot
be deleted. Additionally, the List Name and Access Type settings for the default lists cannot be changed.
To access the Authentication List Configuration page, click System > AAA > Authentication List in the
navigation menu.
Ubiquiti Networks, Inc.
Accounting Selection Fields
Description
The Exec accounting list and the Commands accounting list to apply to users who access the CLI using
a Telnet session.
The Exec accounting list and the Commands accounting list to apply to users who access the CLI using
a secure shell (SSH) session.
The Exec accounting list and the Commands accounting list to apply to users who access the
web-based management interface using HTTP.
The Exec accounting list and the Commands accounting list to apply to users who access the
web-based management interface using secure HTTP.
Authentication List Configuration
Configuring System Information
42