Accessing the Configuration Interface
Connect to the Configuration Interface:
1. Ensure that your computer (or other host machine) is
connected to the Management port on the EdgeSwitch.
Note:
via any port; however, we recommend the
Management port. (Access to the Configuration
Interface can be limited to the Management
port only. You can configure this setting on the
Device tab.)
2. Configure the Ethernet adapter on your host system with a
static IP address on the 192.168.1.x subnet
(e.g., 192.168.1.100).
3. Launch your web browser. Type https://192.168.1.20 in
the address field. Press enter (PC) or return (Mac).
4. The login screen will appear. Enter ubnt in the Username
and Password fields. Click Login.
The Configuration Interface will appear and allow you to
customize your settings. You can enable PoE on the Ports tab.
You can also manage your device using the Ubiquiti® Network
Management System. UNMS
upgrade, and back up your devices using a single application.
By default, you can configure the EdgeSwitch
*640-00039-03*
640-00039-03
https://192.168.1.20
lets you configure, monitor,
™