Port Security Statically Configured Mac Addresses - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™
Use the buttons to perform the following tasks:
• To edit the security settings of one port, select the entry, click Edit, configure the settings as needed, and
click Submit to apply the changes.
• To edit the security settings for all ports, click Edit All, configure the settings as needed, and click Submit
to apply the changes.
• Click Refresh to update the screen with most recent data.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.

Port Security Statically Configured MAC Addresses

Use the Port Security Static MAC Addresses page to view static MAC addresses configured on an interface.
From this page, you can delete statically configured MAC addresses.
To access the Port Security Static MAC Addresses page, click Switching > Port Security > Static MAC in the
navigation menu.
Field
Interface
Static MAC Address
VLAN ID
Sticky Mode
Use the buttons to perform the following tasks:
• To add a static MAC address, click Add, configure the settings as needed, and click Submit to apply the
new settings.
• To remove a static MAC address, select the entry, click Remove, and confirm the deletion.
• Click Refresh to update the screen with most recent data.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Port Security Static MAC Addresses
Port Security Static MAC Address Fields
Description
The interface associated with the rest of the data in the row. When adding a static MAC address entry,
use the Interface menu to select the interface to associate with the permitted MAC address.
The MAC address of the host that is allowed to forward packets on the associated interface.
The ID of the VLAN that includes the host with the specified MAC address.
Indicates whether the static MAC address entry is added in sticky mode. When adding a static MAC
address entry, the Sticky Mode field can be selected only if it is enabled on the interface. If a static
MAC address is added in sticky mode, and sticky mode is disabled on the interface, the MAC address
entry is converted to a dynamic entry and will age out and be removed from the running (and saved)
configuration if it is not relearned.
Configuring Switching Information
174