Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 41

EdgeSwitch Administration Guide
™
Field
User Domain Name Mode
Domain Name
Use the buttons to perform the following tasks:
• If you make changes to the page, click Submit to apply the changes to the running configuration.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Accounting List
Use the Accounting List page to view and configure the accounting lists for users who access the command-
line interface (CLI) to manage and monitor the device. Accounting lists are used to record user activity on the
device. The device is preconfigured with accounting lists. These are default lists, and they cannot be deleted.
Additionally, the List Name and Accounting Type settings for the default lists cannot be changed.
To access the Accounting List page, click System > AAA > Accounting List in the navigation menu.
Field
Accounting Type
List Name
Record Type
Method Options
Ubiquiti Networks, Inc.
User Domain Name Fields
Description
Used to Enable or Disable the administrative mode of domain name authentication on the device.
When enabled, the domain name is included when the user name and password are sent to the
authentication server. The domain name can be specified either by the user in the User Name field on
the login screen in a domain-name\username format, or it can be specified by the Domain Name field.
The domain name sent to the authentication server if the user does not provide one in the User Name
field during logon. When only the username is provided, the device sends the username as domain-
name\username, where domain-name is the string configured in this field. Use the buttons as follows:
To configure the Domain Name field, click this button and specify the desired string.
To reset the field to the default value, click this button and confirm the action.
Accounting List
Accounting List Fields
Description
The type of accounting list, which is one of the following:
• Commands Each CLI command executed by the user, along with the time the command was
executed, is recorded and sent to an external AAA server.
• EXEC User login and logout times are recorded and sent to an external AAA server.
The name of the accounting list. This field can be configured only when adding a new accounting list.
Indicates when to record and send information about the user activity:
• StartStop Accounting notifications are sent at the beginning and end of an exec session or
user-executed command. User activity does not wait for the accounting notification to be
recorded at the AAA server.
• StopOnly Accounting notifications are sent at the end of an exec session or user-executed command.
The method(s) used to record user activity. The possible methods are as follows:
• TACACS+ Accounting notifications are sent to the configured TACACS+ server.
• RADIUS Accounting notifications are sent to the configured RADIUS server.
Configuring System Information
40