Arp Table Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

ARP Table Configuration

Use the ARP Table Configuration page to change the configuration parameters for the ARP table. You can also
use this screen to display the contents of the table.
To display the page, click Routing > ARP Table> Configuration in the navigation menu.
Field
Age Time
Response Time
Retries
Cache Size
Dynamic Renew
Use the buttons to perform the following tasks:
• If you make any changes to the page, click Submit to apply the changes to the system.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
ARP Table Configuration
ARP Table Configuration Fields
Description
The amount of time, in seconds, that a dynamic ARP entry remains in the ARP table before aging out.
The amount of time, in seconds, that the device waits for an ARP response to an ARP request that it
sends.
The maximum number of times an ARP request will be retried after an ARP response is not received.
The number includes the initial ARP request.
The maximum number of entries allowed in the ARP table. This number includes all static and dynamic
ARP entries.
When selected, this option allows the ARP component to automatically attempt to renew dynamic
ARP entries when they age out.
Configuring Routing
190