Enable Password Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™
Field
Line Mode
Password (8-64 characters)
Confirm Password (8-64
characters)
Use the buttons to perform the following tasks:
• If you make changes to the page, click Submit to apply the changes to the running configuration.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.

Enable Password Configuration

Use the Enable Password Configuration page to configure the enable password.
To display the page, click System > Passwords > Enable Password in the navigation menu.
Ubiquiti Networks, Inc.
Line Password Configuration
Line Password Configuration Fields
Description
Any or all of the following passwords may be changed on this page by checking the adjacent box:
• Console
• Telnet
• SSH
Enter the new password for the corresponding Line Mode in this field. Be sure the password conforms
to the allowed number of characters. The password characters are not displayed on the page, but are
disguised in a browser-specific manner.
Re-enter the new password for the corresponding Line Mode in this field. This must be the same
value entered in the Line Password field. Be sure the password conforms to the allowed number of
characters. The password characters are not displayed on the page, but are disguised in a browser-
specific manner.
Enable Password Configuration
Configuring System Information
45