Sntp Server Status - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

SNTP Server Status

The SNTP Server Status page displays status information about the SNTP servers configured on your switch.
To access the SNTP Server Status page, click System > Advanced Configuration > SNTP > Server Status in
the navigation menu.
Field
Address
Last Update Time
Last Attempt Time
Last Attempt Status
Requests
Failed Requests
Click Refresh to display the latest information from the switch.
SNTP Source Interface Configuration
Use this page to specify the physical or logical interface to use as the SNTP client source interface. When an
IP address is configured on the source interface, this address is used for all SNTP communications between
the local SNTP client and the remote SNTP server. The IP address of the designated source interface is used
in the IP header of SNTP management protocol packets. This allows security devices, such as firewalls, to
identify all source packets coming from a specific device.
To access the SNTP Source Interface Configuration page, click System > Advanced Configuration > SNTP >
Source Interface Configuration in the navigation menu.
Ubiquiti Networks, Inc.
SNTP Server Status
SNTP Server Status Fields
Description
The existing server addresses. If no server configuration exists, No SNTP server exists is displayed
on-screen.
The local date and time (UTC) that the response from this server was used to update the system clock.
The local date and time (UTC) that this SNTP server was last queried.
The status of the last SNTP request to this server. If no packet has been received from this server, a
status of Other is displayed:
• Other None of the following enumeration values.
• Success The SNTP operation was successful and the system time was updated.
• Request Timed Out A directed SNTP request timed out without receiving a response from the
SNTP server.
• Bad Date Encoded The time provided by the SNTP server is not valid.
• Version Not Supported The SNTP version supported by the server is not compatible with the
version supported by the client.
• Server Unsynchronized The SNTP server is not synchronized with its peers. This is indicated via
the 'leap indicator' field on the SNTP message.
• Server Kiss Of Death The SNTP server indicated that no further queries were to be sent to this
server. This is indicated by a stratum field equal to 0 in a message received from a server.
The number of SNTP requests made to this server since last agent reboot.
The number of failed SNTP requests made to this server since last reboot.
Configuring System Information
120