Configuring Class Of Service; Cos Ip Dscp Mapping Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide Configuring Quality of Service
™

Configuring Class of Service

The Class of Service (CoS) queueing feature lets you directly configure certain aspects of switch queueing.
This provides the desired QoS behavior for different types of network traffic when the complexities of
DiffServ are not required. The priority of a packet arriving at an interface can be used to steer the packet to
the appropriate outbound CoS queue through a mapping table. CoS queue characteristics that affect queue
mapping, such as minimum guaranteed bandwidth, transmission rate shaping, etc., are user-configurable at
the queue (or port) level.
Seven queues per port are supported. Although the hardware supports eight queues, one queue is always
reserved for internal use by the stacking subsystem.

CoS IP DSCP Mapping Configuration

Use the CoS IP DSCP Mapping Configuration page to map an IP DSCP value to an internal traffic class.
To display the page, click QoS > Class of Service > IP DSCP in the navigation menu.
CoS IP DSCP Mapping Configuration – 1 of 2
Ubiquiti Networks, Inc. 243