Diffserv Class Summary - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

Diffserv Class Summary

Use this page to create or remove DiffServ classes and to view summary information about the classes that
exist on the device. Creating a class is the first step in using DiffServ to provide Quality of Service. After a
class is created, you can define the match criteria for the class.
To display the Diffserv Class Summary page, click QoS > Diffserv > Class Summary in the navigation menu.
Field
Name
Type
Protocol
Match Criteria
Use the buttons to perform the following tasks:
• To add a DiffServ class, click Add.
• To change the name of an existing class, select the entry to modify and click Rename.
• To remove one or more configured classes, select each entry to delete and click Remove. You must
confirm the action before the entry is deleted.
• Click Refresh to update the page with the most current data from the switch.
Ubiquiti Networks, Inc.
Diffserv Class Summary
Diffserv Class Summary Fields
Description
The name of the DiffServ class. When adding a new class or renaming an existing class, the name of
the class is specified in the Class field of the dialog window.
The class type, which is one of the following:
• All All the various match criteria defined for the class should be satisfied for a packet match. All
signifies the logical AND of all the match criteria.
The Layer-3 protocol to use for filtering class types, which is either IPv4 or IPv6.
The criteria used to match packets.
Configuring Quality of Service
249