Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 137

EdgeSwitch Administration Guide
™
Field
Interface
GVRP Mode
GMRP Mode
Join Timer (Centisecs)
Leave Timer (Centisecs)
Leave All Timer (Centisecs)
To change the GARP settings for one or more interfaces, select each interface to configure and click Edit. The
same settings are applied to all selected interfaces.
Click Refresh to refresh the page with the most current data from the switch.
Ubiquiti Networks, Inc.
GARP Port Configuration
GARP Port Configuration Fields
Description
The interface associated with the rest of the data in the row. When configuring one or more interfaces
in the Edit GARP Port Configuration window, this field identifies the interfaces that are being
configured.
The administrative mode of GVRP on the interface. When enabled, GVRP can help dynamically manage
VLAN memberships on trunk ports. GVRP must also be enabled globally for the protocol to be active
on the interface. When disabled, the protocol will not be active on the interface, and the GARP timers
have no effect.
The administrative mode of GMRP on the interface. When enabled, GMRP can help control the
flooding of multicast traffic by keeping track of group membership information. GMRP must also be
enabled globally for the protocol to be active on the interface. When disabled, the protocol will not be
active on the interface, and the GARP timers have no effect.
The amount of time between the transmission of GARP PDUs registering (or re-registering)
membership for a VLAN or multicast group.
The amount of time to wait after receiving an unregister request for a VLAN or multicast group before
deleting the associated entry. This timer allows time for another station to assert registration for the
same attribute in order to maintain uninterrupted service.
The amount of time to wait before sending a LeaveAll PDU after the GARP application has been
enabled on the interface or the last LeaveAll PDU was sent. A LeaveAll PDU indicates that all
registrations will shortly be deregistered. Participants will need to rejoin in order to maintain
registration.
Configuring Switching Information
136