Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 184

EdgeSwitch Administration Guide
™
Field
Interface
Link Status
MED Status
Notification Status
Operational Status
Transmit TLVs
Use the buttons to perform the following tasks:
• To add an entry to the table, click Add, configure the fields, and click Submit to apply the changes.
change an entry, select the entry from table, and click Edit. When you have completed the
• To
changes, click Submit
• To remove an entry, select it from the table, click Remove, and confirm the deletion.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
LLDP-MED Interface Summary
LLDP-MED Interface Summary Fields
Description
The interface associated with the rest of the data in the row. When configuring LLDP-MED settings,
this field identifies the interfaces that are being configured.
The link status of the interface, which is either Up or Down. An interface that is down does not forward
traffic.
The administrative status of LLDP-MED on the interface. When LLDP-MED Mode is enabled, the
transmit and receive function of LLDP is effectively enabled on the interface.
Indicates whether LLDP-MED topology change notifications are enabled or disabled on the interface.
Indicates whether the interface will transmit TLVs.
The LLDP-MED TLV(s) that the interface transmits:
• 0 Capabilities
• 1 Network Policy
to apply the changes.
Configuring Switching Information
183