Igmp Snooping Multicast Router Vlan Status - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

IGMP Snooping Multicast Router VLAN Status

If a multicast router is attached to the switch, its existence can be learned dynamically. You can also statically
configure one or more VLANs on each interface to act as a multicast router interface, which is an interface
that faces a multicast router or IGMP querier and receives multicast traffic.
To access the IGMP Snooping Multicast Router VLAN Status page, click Switching > IGMP Snooping >
Multicast Router VLAN Status in the navigation menu.
Field
Interface
VLAN IDs
Use this page to view the multicast router VLAN status for each interface. Use the buttons to perform the
following tasks:
• Click the Add and Edit buttons to be redirected to the Multicast Router VLAN Configuration page for the
selected interface to enable or disable VLANs as multicast router interfaces.
• To disable all VLANs as multicast router interfaces for one or more physical ports or LAGs, select each
entry to modify, click Remove, and confirm the action.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
IGMP Snooping Multicast Router VLAN Status
IGMP Snooping Multicast Router VLAN Status Fields
Description
The interface associated with the rest of the data in the row. Only interfaces that are configured with
multicast router VLANs appear in the table.
The ID of the VLAN configured as enabled for multicast routing on the associated interface.
Configuring Switching Information
149