Dhcp Snooping Static Bindings - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

DHCP Snooping Static Bindings

Use this page to view, add, and remove static bindings in the DHCP snooping bindings database.
To access the DHCP Snooping Static Bindings page, click Switching > DHCP Snooping > Base >
Static Bindings in the navigation menu.
Field
Interface
MAC Address
VLAN ID
IP Address
Use the buttons to perform the following tasks:
• To add a DHCP Snooping static binding, click Add. Then, enter a valid MAC address, select a VLAN ID from
the drop-down menu, enter an IP address, and click Submit to apply the changes.
• To remove a DHCP snooping static binding,
the operation
.
• Click Refresh to refresh the page with the most current data from the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
DHCP Snooping Static Bindings
DHCP Snooping Static Bindings Fields
Description
The interface on which the DHCP client is authorized.
The MAC address associated with the DHCP client. This is the Key to the binding database.
The ID of the VLAN the client is authorized to use.
The IP address of the client.
select the entry from the table, click Remove, and confirm
Configuring Switching Information
140