Accessing The Configuration Interface - Ubiquiti EdgeSwitch 10x Quick Start Manual

Accessing the Configuration Interface

The EdgeSwitch is set to DHCP by default, so it will try to
automatically obtain an IP address. If that fails, then it will use
the default fallback IP address, 192.168.1.20. Proceed to the
appropriate section, DHCP or Fallback IP Address:
DHCP
Use one of the following methods:
• Set up the DHCP server to provide a specific IP address to
the EdgeSwitch based on its MAC address (on the label).
• Let the EdgeSwitch obtain an IP address and then check the
DHCP server to see which IP address was assigned.
To log in, follow these steps:
1. Launch your web browser. Type the appropriate IP address
in the address field. Press enter (PC) or return (Mac).
2. The login screen will appear. Enter ubnt in the Username
and Password fields. Click Sign In. (When you sign in, you
agree to accept the Ubiquiti License Agreement.)
The EdgeSwitch Configuration Interface will appear.
Customize additional settings as needed. For 24V Passive PoE
configuration, refer to the Configuring PoE Settings section. For
more information, refer to the EdgeSwitch documentation,
which is available at www.ubnt.com/download/edgemax
You can also manage your device using UNMS, which lets you
configure, monitor, upgrade, and back up your devices using a
single application. Get started at www.unms.com