Dhcp Server Pool Configuration - Ubiquiti EdgeSwitch ES-24-250W Administration Manual

EdgeSwitch Administration Guide
™

DHCP Server Pool Configuration

Use the DHCP Server Pool Configuration page to create the pools of addresses that can be assigned by the
server.
To access the DHCP Server Pool Configuration page, click System > Advanced Configuration > DHCP Server
> Pool Configuration in the navigation menu.
If you select Dynamic or Manual from the Type of Binding drop-down menu, the screen refreshes and a
slightly different set of fields appears.
Field
Pool Name
Type of Binding
Network Base Address
Network Mask
Ubiquiti Networks, Inc.
DHCP Server Pool Configuration
DHCP Server Pool Configuration Fields
Description
Select the pool to configure. The menu includes all pools that have been configured on the device.
Specifies the type of binding for the pool. The options are:
• Manual You statically assign an IP address to a client based on the client's MAC address.
• Dynamic The DHCP server can assign the client any available IP address within the pool. This type
is also known as Automatic.
Dynamic pools only – The network portion of the IP address. A DHCP client can be offered any
available IP address within the defined network as long as it has not been configured as an excluded
address.
Dynamic pools only – The subnet mask associated with the Network Base Address that separates the
network bits from the host bits.
Configuring System Information
104